Just Build It

Block wall finishing, wallpaper

Wallpaper installation

Here you will find the solution and materials for wallpapering and preparatory work on walls in dry indoor spaces.

1 2 3 3 4 5 6 7 8 9
1

Block wall

2

Primer

3

Plaster

4

Reinforcement net

5

Finishing plaster

6

Sealant

7

Primary paint

8

Wallpaper glue

9

Wallpaper

Wallpaper installation

  1. Block wall

  2. Primer

    The primer can improve the adhesion between the stone structure and the plaster mixture. The substrate can have a very different adhesion, some of them need a primer but others don´t. Priming is definitely necessary for whiteblocks, as a rule, the plaster mixture adheres well to expanded clay blocks. The choice of primer should be based on the type of plaster mixture and the product documentation. Products from different brands may not be compatible.

  3. Plaster

    The layer of plaster helps to even out the unevenness of the masonry or concrete structure and reduces the possibility of cracks reaching the finishing layer.

  4. Reinforcement net

  5. Finishing plaster

  6. Sealant

  7. Primary paint

    Primer on the wallpapered wall is optional. However, this layer helps the later removal of wallpaper. By tinting the primer, the appearance of a possible joint between the walloaoer panes can also be reduced. When using the primer, make sure that the adhesive also adheres to the substrate.

  8. Wallpaper glue

    When choosing wallpaper glue, it is necessary to know what type of wallpaper is planned to be installed. A different glue is often suitable for each type. Check the technical documents, recommendations and requirements of the wallpaper manufacturer and glue and make a suitable choice. For example, different types of glue are often required for paper, vinyl, fleece, fiberglass, and the like. wallpapers. Not all adhesives are suitable for all types of wallpaper!

  9. Wallpaper

Comments

Add a comment

Get in touch

Registreeri

Oled juba kasutaja?

Logi sisse

Pole veel kasutaja?